IV Therapy SuppliesWhat Comes in an IV Start Kit?

AI-generated sealed-supply context, not actual Clint packaging or a verified inventory of kit contents.

An IV start kit and an IV administration set serve different purchasing needs. The Clint start-kit component tables reviewed here list preparation and dressing supplies. They do not list an IV catheter, administration tubing, a solution bag or medication. Ordering staff should confirm the supplied kit specification and reconcile it with the clinical team's approved supply list before assuming one kit covers the whole request.

That distinction matters when an order simply says “IV kit.” Clint's IV Therapy section separates start kits, administration sets, catheters, solutions and injectables. A clear request identifies the exact item in each needed group, its manufacturer code and purchasing unit. The clinician establishes suitability and compatibility; staff preserve those specifications through ordering and receiving.

Separate the supply groups before comparing products

The word “kit” does not establish a universal component list. A start kit may group preparation and dressing materials, while a product sold in the administration category may be a tubing set. Read the exact listing and supplied specification rather than treating their names as synonyms.

Scroll sideways to read all columns →

Category placement helps locate a product, but it cannot establish its clinical role. For example, a broad catheter category can also contain epidural or port-access items. Match the approved product code rather than substituting an item because it appears under the same heading.

What the reviewed start-kit listings show

Clint lists CP-267004, the IV start kit with 0.67 mL ChloraPrep SEPP and Tegaderm 1624. Its component descriptions identify a Tegaderm dressing, nonwoven gauze, the ChloraPrep SEPP applicator, Transpore tape, an IV-change label and a tourniquet. These are the listed preparation and dressing components, rather than evidence that a catheter or tubing is included.

The CP-71121 start kit with 0.67 mL ChloraPrep SEPP and Tegaderm Advanced Securement lists the same broad component types with a different named dressing. Preserve the complete dressing identity in the request. Similar kit names do not establish that the clinical team accepts a substitution.

The public “Additional Details” tables also include packaging materials and manufacturing-style quantities. They mix units such as EA, CS, MSI and FT. Those entries should not be read as the number of pieces inside one patient kit or as a confirmed number of kits in the sale package. Ask Clint to confirm the per-kit contents and purchasing unit for the exact code.

If a title and component table disagree, return that discrepancy for clarification before ordering. Record the conflicting fields and the product code so the supplier can confirm the actual configuration. Choosing whichever description appears more familiar leaves the uncertainty unresolved.

Administration sets need their own specifications

Two separately listed examples are Exel CP-29082, 15 drops/mL with Luer-Lock, and Exel CP-29085, 60 drops/mL with Luer-Lock. The EXELINT manufacturer table confirms those code and specification pairings.

Drops/mL describes the administration set's drop-factor specification. It is not a prescribed infusion rate. Ordering staff can match that printed field to the approved request without calculating a rate or deciding which set a patient needs. Likewise, a Luer connector description alone does not prove compatibility with every device or infusion pump.

Package terminology needs attention here: Clint describes CP-29085 as Box/50, while EXELINT lists 50 pieces per case. Confirm how the supplier sells and ships that code. A count of 50 does not establish that “box” and “case” have the same meaning across every ordering record.

Catheters are a separate code check

Clint's Exel CP-26741 IV catheter is listed as 20 gauge × 1 inch, Box/50. The EXELINT catheter table agrees on that code, gauge and length and lists 50 per box and 200 per case.

This is an example of a specification staff can verify, not a recommendation to choose a 20-gauge catheter. Keep gauge, length and code together. A matching gauge with a different length or device design is a different request that needs clinical confirmation.

Complete the ordering and receiving handoff

For example, a request for a start kit with the named securement dressing should retain both the kit code and dressing description. If the same approved list also calls for an administration set and catheter, those codes remain separate order lines unless the supplier confirms that the selected package includes them. This makes an omission visible before staff receive a kit that covers only part of the request.

An offer to substitute a different kit should identify which components change. An offer to substitute tubing should identify changes in connector, drop factor or other specified fields. Route those changes to the clinical team for review rather than accepting similarity of product names as confirmation.

Use the approved supply list to identify what the selected kit covers and what remains a separate line item. For each line, record the full product name, manufacturer code, supplier code, confirmed package unit and quantity. Keep unresolved component or packaging questions attached to that line so they are answered before the purchase is completed.

At receiving, reconcile the delivered identity and quantity with the order and review the supplied expiry, package condition and labeling under the office's procedures. Storage and use instructions belong to the exact supplied products and components; a supplies category does not establish one temperature or handling rule for every item.

To check the available configurations, start with Clint's IV Therapy section or the exact product links above. Confirm current availability, account pricing and supplied contents with Clint. A visible listing or login button does not establish stock.

Frequently asked questions

Does an IV start kit include an IV catheter?

The reviewed CP-267004 and CP-71121 component tables do not list a catheter. Confirm the supplied specification rather than assuming this applies to every start kit.

Is an administration set the same as a start kit?

No. Clint lists them in separate categories. The administration-set examples have tubing-set specifications such as connector type and drops/mL; the reviewed start kits list preparation and dressing components.

Does 60 drops/mL mean the patient should receive 60 drops per minute?

No. EXELINT lists 60 drops/mL as a product specification. It does not supply a patient-specific infusion prescription.

Can the kit's component-table quantities establish its sale pack?

No. The reviewed CP-267004 component table mixes component and packaging units. Confirm per-kit contents and the number of kits supplied with Clint for the exact code.

Sources checked September 30, 2026. Clint listings and EXELINT product tables do not display revision dates. Product examples are limited to the linked codes; purchasing-unit and kit-content questions require confirmation against the supplied specification.